Verizon Samsung Galaxy Tab S3

Verizon Samsung Galaxy Tab S3

Verizon Samsung Galaxy Tab S3 Gets Netflix HDR October Patch, not all the tv update, but all so fix for fingerprints and security updates too. This is a surprise for me because many users have had issues with the fingerprint, so the last update. Apple has come to update school early than Samsung this time. Apple a few days ago released the iOS 11.2  adding more features and corrections to their operating systems. This update will change the build number to NRD90M.T827VVRU1AQ3J.

Software Update Instructions for Verizon Samsung Galaxy Tab S3

As recommended by the Verizon, Before starting the update make sure your tablet is fully charged and it is connected to a WIFI network for fast download.

Note: Estimated software download time is 6-10 minutes. Estimated software update time is 6-10 minutes.

Wi-Fi Only OTA Programming – Wi-Fi Exclusive Update
If Wi-Fi is enabled and your device is connected to a Wi-Fi network, your device will be able to receive and download new software updates.

    1. The download will take place when the device is in Wi-Fi coverage, but coverage does not need to be consistent. You can use multiple Wi-Fi networks and disconnect from/reconnect to Wi-Fi, and the update will continue to download from where it left off until complete.
    2. When the download is complete, you’ll receive a notification that there’s a new software update available for installation. Tap Install Now to continue with the installation. The device will power off and back on and the installation process will begin.

Server-Initiated Software Update
You’ll be notified on your device that a software update is available.

    1. Select Install now and your device will power off and back on and the installation process will begin. Tap OK to begin the installation.

      Note: If you choose to Defer, this will delay installation and you’ll be taken back to the Home screen. The software update message will appear periodically until you install the update.

    2. After you’ve received first notification of the software update, you can manually initiate by going to Home > Applications > Settings > About Device > Software updates. Under System updates, tap Restart & install to install the update. Your device will power off and back on and the installation process will begin.
    3. Once the installation is complete, the device will power off and then back on again.

User-Initiated Software Update
This process allows a user to navigate through the device options to seek updates.

    1. From the Home screen, tap the Menu Key > Settings > About phone > Software updates > Check for Updates.
    2. If your device finds a new software update, tap Download now. When complete, a screen will appear advising you that the new version of the software is ready to be installed. Tap Install update.
    3. The device will power down and power back on. A screen will appear stating that the installation has been completed. Tap OK.

System Update while Roaming
If you’re roaming, you won’t receive a software update notice. To update, you’ll need to either enable Wi-Fi and wait for the update notice to appear or manually update by going to Home > Application > Settings > About device > Software updates.

To enable Wi-Fi:

    1. Go to Settings > Wireless & networks.
    2. Tap Wi-Fi.
    3. To connect to an available Wi-Fi network, select Wi-Fi settings and select an available Wi-Fi network or manually add a Wi-Fi network.

If the software update fails to install, you’ll get an error screen. However, this only means the software didn’t install properly. The device will power back on with original software and will prompt you again to install the software update.

Official Changelog provided by Verizon Wireless

Software Version: NRD90M.T827VVRU1AQJ3

Android® Security Patch Level: 2017-10-01

Netflix High Dynamic Range (HDR) video streaming is now supported
Fixed Fingerprint Setup Wizard issue
Latest Android security patches



Drop Your Comment Using Any Of Our Comment Systems